My Cart


Wismec Theorem Atomizer

By Wismec

Sold Out


The Theorem Atomizer is Wismec's first hybrid drip tank that utilizes a never-before-seen Open Wicking System. The combination of a top fill e-juice plug, top airflow, and Solid Leak Proof Sleeve virtually eliminates any leakage while implementing effortless building and filling. Designed by Jay Bo and inspired by Suck My Mod, this beautifully designed RTA features a unique split positive post, reduced atomizer chamber, and the much anticipated stainless steel NotchCoil. Putting their minds together, the atomizer was created with the purpose of maximizing convenience and usability while making zero compromise in performance.

Open Wicking System Explained

Engineering the very first Open Wicking System manifested the easiest coil access ever seen in RTAs on the market. Similar to RDAs, the top cap sleeve is simply removed to expose the build deck. Combined with a top airflow system, this design minimizes any potential leak points from the bottom of the device. The Theorem features a reduced atomizer chamber similar to the Indestructible RDA, where airflow is adjusted by loosening the top cap and adjusting the bottom ring. Single or dual airflow is compatible with the Theorem by interchanging the included top rings. Airflow is channeled from the top cap directly behind the coil via a reduced chamber facilitated juice plug. This airflow method greatly enhances flavor production while doubling as a top fill port for efficient and leak-free filling. Refilling is made easy by simply removing the top cap and filling e-liquid through the port, rendering the coil free of any disruption.

Build Deck

The Theorem features an off-set negative and positive post that greatly increases the build room while simultaneously granting vapers limitless custom coil designs. Single horizontal, dual or single vertical coil builds can be outfitted on this device and are secured via hex screws. The deck also features colossal wicking ports, enabling vapers to simply drape the cotton down and replace the sleeve. This extraordinary design minimizes trimming and is more forgiving when trying to wick properly to optimize vapor production.

The NotchCoil

An all new pre-built NotchCoil was designed to function similar to a Clapton coil with many advantages. Clapton coils require higher wattages, rapidly drain battery life, and have longer ramp-up times to the amount of wire needed to increase surface area. The NotchCoil features opposing slants cut into an ultra thin stainless steel tube to increase surface area while eliminating ramp-up time. Users can vape comfortably at lower wattages while making no sacrifices in flavor or vapor production. The coil has a resistance of 0.23 ohm and will be available to purchase separately in the near future. The recommended wattage range for optimum flavor is between fifty and fifty-five watts by Jay Bo and Suck My Mod.

Package Contents:

  • 1 X Wismec Theorem RTA
  • 1 X Spare Glass Tube Sleeve
  • 1 X Stainless Steel Tube Sltteve
  • 2 X Airflow Control Rings (Single and Dual Coil)
  • 2 X NotchCoils with Cotton
  • 1 X Hey Key
  • 4 X Extra Hey Screws
  • 3 X Spare Silicone Rings
  • 1 X User Manual
  • Designed by Jay Bo and Suck My Mod Collaboration
  • Diameter: 22mm
  • Height: 46.25mm
  • Construction: Stainless Steel and Pyrex Glass
  • Optional Stainless Steel Reinforcement Sleeve
  • Open Wicking System
  • Split-Positive Post Design
  • Deckmilled Negatives
  • Offset Positive and Negative Posts
  • Large Diameter Post Terminals
  • Compatible with Single or Dual Coil Configurations
  • Notch Coil
  • Top Adjustable Airflow via Control Rings
  • Convenient Top Fill System via E-Juice Plug
  • Reduced Atomizer Chamber
  • 510 Drip Tip
  • Adjustable 510 Pin
  • Extra Large Wicking Ports

Recently Viewed Items

Join our Mailing List

Sign up to receive our daily email and get 50% off your first purchase.

My Cart

Subtotal: $ 0.00

Your cart is currently empty.

Register to start earning points! Close
Back to the top