Electric dab rigs make it easy to enjoy wax concentrates without the need for a torch. Follow these general steps:

1. Charge the battery fully before your first use.
2. Fill the glass attachment with water if your e-rig uses water filtration. Do not overfill.
3. Power on the device according to the manufacturer’s instructions.
4. Select your desired temperature or heat setting. Lower temperatures typically produce better flavor, while higher temperatures produce denser vapor.
5. Allow the coil or atomizer to preheat until the device is ready.
6. Use a dab tool to place a small, rice grain-sized amount of wax concentrate onto the coil or into the atomizer chamber.
7. Inhale slowly through the mouthpiece while the concentrate vaporizes.
8. Clean the atomizer with a cotton swab after each session to help preserve flavor and reduce residue buildup.

Note: The steps above are intended as a general guid. Button controls and heating procedures may vary depending on the brand and model of your e-rig. Always refer to the manufacturer’s user manual for specific operating instructions.

Regular cleaning helps maintain flavor and performance while extending the life of your electric dab rig.

• Empty the used water from the glass attachment and rinse it with hot water to loosen residue.
• Fill the glass attachment only with 90% or higher isopropyl alcohol and add a few tablespoons of coarse salt.
• Cover the openings and shake vigorously for 1–2 minutes to help remove buildup.
  For heavy residue, let the solution soak for 30–60 minutes, then shake again.
• Rinse thoroughly with hot water until all alcohol, salt, and residue are removed. Repeat if necessary.
• Allow the glass to dry completely before reassembling your electric dab rig.

Important: Never soak or submerge the battery, electronic base, heating chamber, or atomizer in alcohol or water unless the manufacturer specifically states that those parts are removable and safe to clean that way. Instead, wipe those components with a cotton swab lightly dampened with isopropyl alcohol, following the manufacturer’s cleaning instructions.